Osb (Oriented Strand Board) Boards 12 Mm Thick (11% Off)
Board Size: 4' X 8' (1220mm X 2440mm)
OSB (Oriented Strand Board) is an engineered wood-based panel consisting of strands of wood which are bonded together with a synthetic resin; the strands are pressed together in layers. In the outer layers strands are generally oriented longitudinally in line with the panel length, whereas in the middle layers strands generally lie in a cross wise direction.
Price: 12 mm thick Rs 98 per sq. ft.
The wood species used in OSB manufacture include both softwoods (spruce, pine) and some hardwood. Wood strands are cut tangentially from debarked logs which are held longitudinally against rotating knives. The ribbon of strands produced is usually about 75 mm wide and this breaks up on handling to produce individual strands which are typically 100 mm along the grain and from 5 to 50 mm across the grain.
After drying, these strands are sprayed with a synthetic resin binder. The resin types typically used include Phenol formaldehyde (PF), melamine fortified Urea Formaldehyde (MUF) or isocyanate (PMDI), all of which are moisture resistant binders. In Europe, it is common to use a combination of binders, typically PMDI would be used in the core and MUF in the face layers and this has the advantage of reducing press cycles whilst imparting a bright appearance to the surface of the panel.
OSB is readily identified by its relatively large and long wood strands. The orientation of the surface strands is not always visually apparent, especially in small cut pieces of panel. The main merits of OSB lie in the field of its mechanical performance, which is directly related to the geometry of the strands and their orientation within the panel. Although OSB is made up of relatively large strands of wood, its surface is relatively smooth and this can be further enhanced by sanding without loosing the aesthetic character which is unique to OSB.
OSB varies in colour from a light straw colour to a medium brown depending on wood species used, resin system adopted and pressing conditions employed. It contains no knotholes, core voids or points of weakness.
Density, mass and sheet size
Panel density (and thus panel mass) varies depending upon the product, being affected by the timber species and the manufacturing process. Typical densities are 600-680kg/m_. Thus, for example, a 2400 x 1200 x 12mm panel will weigh approximately 20 kg.
Panel sizes commonly available are 2440mm x 1200mm, 2440mm x 1220mm and 2500mm x 1250mm in thicknesses of 6mm to 40mm.
Other sizes are available or can be produced to order. Panels are produced with either square or tongued & grooved (T&G) edges.
Due to its high mechanical properties and the orientation of the strands within panels, OSB is particularly suitable for load-bearing applications in construction and is widely used for flooring, roof decking and wall sheathing, but there is also a wide field of other applications where OSB as a wood-based panel product can be utilised. Different grades of the product are available for different levels of loading and different environmental conditions. Guidance on the use of OSB in these load-bearing applications is given in ENV 12872 and EN 13986. OSB is a quality, precision-engineered product that can satisfy the same applications and loading conditions as plywood and in some cases a thinner OSB panel may be used thereby reducing costs.
Large quantities of OSB are also used for sarking and industrial packaging and in site hoardings and pallet tops.
It will soon be a legal requirement to demonstrate that OSB used in construction satisfies the requirements of the European Construction Products Directive. This legal requirement is written into national building regulations. Manufacturers shall demonstrate compliance with the legal requirements by showing that their OSB complies with the harmonised standard EN 13986 "Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking". This standard should be published before the end of 2001. It calls up EN 300 "Oriented Strand Boards (OSB) - Definitions, classification and specifications", which will have to be used when specifying OSB.
Four grades of OSB are defined in EN 300 in terms of their mechanical performance and relative resistance to moisture. These are:
OSB/1 - General purpose boards and boards for interior fitments (including furniture) for use in dry conditions.
OSB/2 - Load-bearing boards for use in dry conditions.
OSB/3 - Load-bearing boards for use in humid conditions
OSB/4 - Heavy-duty load-bearing boards for use in humid conditions.
MRP : ? 110.00 Per sq. ft.
Discounted Price : ? 98.00 Per sq. ft
Call Us @ 01-5180320
Cell: 9801188110, 9801167223
|Total Ad Views:||194 times|
|Posted on:||2017-06-07 (Expires on: 1 days)|
|Category:||Home & Lifestyle / Others|
|Ad Type:||Offering Ads|
|Market Price:||NRs. 110|
|Reference Site URL:||http://www.nepalconstructionmart.com/shop/osb-board/|
|Social Networks:||Share AD On Facebook|
Open Facebook Comments
Other Posts by this user
SUPREME FURNITURE Web Chair
Mainali Business Concern 7245 Single Bowl Kitchen Sinks